LevelOne FPC-0103T, Руководство пользователя

Страница: 26 / 31

25
Q
UESTIONS
&
A
NSWERS
This chapter provides a number of examples of Questions (Q:), Causes (C:),
and Answers (A:). If your LAN is not functioning properly, look up the
problem here, or ask your dealer for technical assistance.
Q:When I run the DOS real mode driver , it reports that “CardBus PC
Card are not present”, but I did install the CardBus PC Card in the
slot?
A: Currently, there are no PC Card/Socket Service which supports CardBus
socket in the DOS mode. We already built the direct enabler into each DOS
mode drivers to active the CardBus PC Card. Following check list could
help you identify the problem.
1. If you install some other DOS mode Card/Socket Service from AMI,
Award, Phoenix or SystemSoft…etc, please disable them by comment
out these drivers in the CONFIG.SYS file.
2. If memory management software e.g. EMM386 has been installed, you
have to reserve some area in upper memory (C000:0 -- EFFF:F) for
attribute memory of PCMCIA card during enabling the card. Example:
Device=C:\DOS\EMM386.EXE RAM X=D000-D3FF. Reserve D000 -
D3FF for attribute memory.
Q: When I run the DOS real mode driver , it reports that
“PCI-to-CardBus bridge are not present”,but my notebook is equipped
with the CardBus socket?
A: Some notebook computer, for example Toshiba , need to enable the
System’s BIOS setting to support CardBus environment. Pleae check
your user manual to find the detail information.
Q:How come I see the message “UnKnown PCI-to-CardBus bridge” when
I try to load the driver in DOS mode?