Features
Overview
1
Product Display
2
◆
◆
◆
◆
◆
◆
◆
◆
◆
PoE Standard:
Flow control method:full duplex adopts IEEE 802.3x ,half duplex adopts Back pressure.
Port supports Auto MDI/MDIX.
supports lightning protection(secondary level requirements).
Single port supports PoE power:30W(first port outputs
Exchanging Mechanism: Store and forward.
All ports support exchange at wirespeed.
Zero-configuration:automatically supply for adaptive devices.
Panel indicator monitors operating status and helps fault analysis.
IEEE802.3af/at PoE++/HiPoE, support all ports standard detection.
Support power supply for PoE devices such as AP and network monitoring cameras connected by
Cat5/6 ethernet cables.
Port
HiPoE_60W).
◆
Automatically
detecting
and
supplying
power
for
powered
devices
conformed
to
IEEEE
802
.
3af/at
PoE++/HiPoE, unmanaged
PoE
switch supports
first
port
output
HiPoE
_
60W. It can
provide a convenient service for PoE network equipments like wireless access points(AP) and IPC
surveillance cameras.
Function Switch
Mark
Mode
Description
N
V
S
Standard
Normal
Port
Isolation
Super
Mode
All
ports
communicate
freely
,
adapting
to common
data
transmission environment
Switch to VLAN mode;downlink isolating from each other,uploads and downloads data
through uplink;suppress network failure like broadcast storm and virus attack
Downlink speed limitation:10M(Ultral-far transmission:250 meters)
Indicator
Status
Always
ON
Always
OFF
Flashes
Port
circuit
or
cunrrent
over
-
loaded
Port
Isolation
LED
：
V
Super
Mode
LED
：
S
Port
Isolation
mode
ON
Super
mode
ON
PoE
LED
Orange
Green
Powered
equipments
connected
and
power
supply
narmally
No powered
equipments
connected
or no
power
supply
Network signal communicated
Network signal not communicated
Indicator
Description
Normal
Power
Unconnected
Always
ON
Always
ON
Always
ON
Always
OFF
Always
OFF
Always
ON
Power LED
:
P
PoE
Link
8FE PoE+2GE UP
8FE PoE+2GE UP
Hybrid PoE Switch
Hybrid PoE Switch
1
2
3
4
9-UP
10-UP
5
6
7
8
100M PoE port
1000M Uplink Function switch
Indicator
