LevelOne FCS-6010, Руководство пользователя

Страница: 15 / 47

15
After finish setting, the connection successful or fail showed. If connection failed, user can either try
again or quit the installation. User can either select Start Web GUI to continue or click
“X” on the top
right of the screen to finish the installation.
Once installation is completed, the Administrator should proceed to the next section "Access to the
Network Camera" for necessary checks and configurations.
4. Access to the Network Camera
5.1 Check Network Settings
The Network Camera can be connected either before or immediately after software installation onto
the Local Area Network. The Administrator should complete the network settings on the configuration
page, including the correct subnet mask and IP address of gateway and DNS. Ask your network
administrator or Internet service provider for the detail information.
5.2 Add Password to prevent Unauthorized Access
The Administrator should immediately implement a new password as a matter of prudent security
practice. The user name and
password for the Administrator are assigned as “admin/admin”. Once
the Administrator’s password is saved, the Network Camera will ask for the user’s name and
password before each access. The Administrator can set up a maximum of ten (10) user accounts.
Each user can access the Network Camera except to perform system configuration. Once the
password is changed, the browser will display an authentication window to ask for the new password.
Once the password is set, there is no provision to recover the Administrator’s password. The only
option is to restore to the original factory default settings.