User Manual of Network Camera
54
1.
Click the
Wireless Dial
tab to enter the Wireless Dial configuration interface.
2.
Check the checkbox of
Enable
to enable the wireless dial settings.
3.
Configure the dial parameters.
1)
Select the dial mode from the drop-down list. Auto and Manual are selectable.
If Auto is selected, you can set the arming schedule for dialing; If Manual is
selected, you can set the offline time and manual dialing parameters.
2)
Set the access number, user name, password, APN, MTU and verification
protocol. You can also leave these parameters blank, and the device will
adopt the default settings for dialing after other parameters are configured.
3)
Select the network mode from the drop-down list. Auto, 3G and 4G are
selectable. If Auto is selected, the network selection priority comes as: 4G >
3G > Wired Network.
4)
Input the offline time if Manual is selected as the dial mode.
5)
Input the UIM Number (Mobile Phone Number).
6)
Click the
Edit
button to set the arming schedule if Auto is selected as the dial
mode.
7)
Click
Save
to save the settings.
Figure 6-16
Dial Parameters
Содержание FCS-3085
