User Manual of Network Camera
45
and Multicast Address.
3.
(Optional) Check the checkbox of
Enable Multicast Discovery
, and then the
online network camera can be automatically detected by client software via
private multicast protocol in the LAN.
4.
Click
Save
to save the above settings
.
Notes:
⚫
The valid value range of MTU is 1280 ~ 1500.
⚫
The Multicast sends a stream to the multicast group address and allows multiple
clients to acquire the stream at the same time by requesting a copy from the
multicast group address. Before utilizing this function, you have to enable the
Multicast function of your router.
⚫
A reboot is required for the settings to take effect.
6.3.2
Configuring Port Settings
Purpose:
You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.
Steps:
1.
Enter the Port Settings interface:
Configuration > Basic Configuration > Network > Port
Or
Configuration > Advanced Configuration > Network > Port
Figure 6-7
Port Settings
2.
Set the
HTTP port, RTSP port, HTTPS port and server port of the camera.
HTTP Port
: The default port number is 80, and it can be changed to any port No.
which is not occupied.
RTSP Port:
The default port number is 554 and it can be changed to any port No.
Содержание FCS-3085
