LevelOne FCS-3021, Руководство пользователя, Страница: 6 / 113

Installation
In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator"
refers to the person who can configure the Network Camera and grant user access to the camera.
Hardware installation
Please verify that your product package
contains all the accessories listed in the
foregoing Package Contents. Depending on
the user’s application, an Ethernet cable may
be needed. The Ethernet cable should meet the
specs of UTP Category 5 and not exceed 100
meters in length.
Upon powering up, the status LED will become lighted first and then the device will go through
booting process. The status LED will be steady orange for getting IP address. After getting IP
Address, the LED will blink orange and red as heartbeat to indicate alive.
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug
in the power adapter. If the LED turns out to blink orange-color, go to next paragraph “Software
installation”.
This Network Camera provides a general I/O terminal block with one digital input and one digital
output device control. The pin definition is as below.
1: Power
2: Digital output
3: Digital input
Since FCS-3021 is a PoE IP camera, it could work without attaching to power
outlet as long as it connects to PoE switch.
Connect the power adapter jack to the Network Camera before plugging in to the
power socket. This will reduce the risk of accidental electric shock.