LevelOne Broadband Router User Guide
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual Servers.
They must use the IP Address allocated to this device by your ISP, as shown
on the
WAN Status
screen.
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP,
rather than Dynamic. If using a Fixed IP Address, it is entered on the
WAN
screen.
Using this Device as a Virtual Web Server
It is possible to configure the FBR-1700TX itself as a Virtual Web Server.
Once this is done, you can configure this device through the Internet.
For the remote PC, the destination IP Address is the
IP Address
shown on the
External LAN Port
screen.
Upon connecting to the FBR-1700TX, you will be prompted for the device
password.
Ensure that a password has been set!
To make the FBR-1700TX a
Virtual Web Server
:
•
Enable
Virtual Server
on the
Advanced Internet
screen
•
Enable
Web Server
on the
Virtual Servers
screen.
•
Enter the
Device IP Address
(from the
LAN
screen) as the IP Address of
the Web Server.
68
