background image

IMPORTANT SAFEGUARDS

Before use, please read and follow these instructions carefully, even if you feel you are familiar with the 
product. They contain important information concerning the operation, safety and maintenance when 
using the product. Please retain these instructions for future use and reference.

•  When first installed you may experience a burning smell or a little smoke, this is normal and will fade 

within a few minutes.

•  The surface temperature of this heater can be very hot, do not touch when the heater is turned on.

•  Only connect the product if the voltage indicated on the product label(s) corresponds with the mains 

voltage.

•  The heater must not be located immediately below a wall socket.

•  Do not unplug the product by pulling on the cord. To unplug grasp the plug, not the cord.

•  This product has an overheat protection safeguard that turns off the heater whenever it begins to 

overheat. If it does overheat switch off the heater, remove mains plug from wall socket and allow to 
cool down for 45 minutes. The heater will work again when cooled. Carefully check prior to using 
again that the reason for overheating was not curtains, clothing, furniture etc covering any of the 
heaters air vents.

•  Turn off the appliance and unplug from socket when not in use. Allow to cool down prior to cleaning. 

Use a damp cloth for clean and a dry cloth to dry. Do not use cleaning chemicals.

•  Do not use the product in areas where petrol, paint or flammable liquids are used or stored.

•  If the power cord is damaged it must be replaced by a service agent or a equivalent qualified 

electrician. Do not continue to use until repaired, as it may cause a hazard.

•  This appliance is not intended to be used by young children or disabled persons unless they have been 

adequately supervised by a responsible adult to ensure the appliance is used correctly and safely.

•  Young children should be supervised to ensure they do not play with the product.

•  To protect against fire, electrical shock and injury to persons, do not immerse the appliance power cord 

or plug in water or other liquid.

•  This appliance is intended for use indoor only. Avoid overheating do not cover the heater with towels, 

curtains, clothing etc.

•  Never use the heater to dry clothing or similar items, or handle the plug with wet hands.

•  Ensure the heater is installed so that the switches and other controls cannot be touched by a person 

in the bath or shower. Must not be installed in a bathroom or in any area containing a bath, shower, 
washbasin or close to water or wet items.

•  Ensure the appliance is securely fixed to the wall and is correctly positioned level. The appliance should 

be placed no less than 150mm from a barrier/wall on all sides - top, bottom, left and right.

•  Always unplug, wait for appliance to cool down, and store when not in use.

•  This product must not be disposed together with the domestic waste. This product has to 

be disposed of at an authorised site for recycling of electrical and electronic appliances. By 
collecting and recycling waste, you help save natural resources and ensure the product is 
disposed of in a safe and environmentally friendly way.

Содержание LEVPH750TPR









Отзывы: