levante-products.com
LEV0549/Page 5 of 8/Issue 1/07.18
CONTROLS
4 - Programs
The function module is equipped with an accurate thermal cut-out when the programmed temperature is achieved.
It has a built in memory with 6 heating programs, of which 5 are pre-defined as “P1,P2,P3,P4,P5” and 1 is available
for programming by the user as “UP”.
There are 6 programs allow switching between Low Heat and High Heat at various times of the day and night. 5 of
which are pre-defined and cannot be altered. These are displayed as “P1, P2, P3, P4, P5”. The other is the”UP” program
which can be defined by the user.
The table below shows the Low/High heat setting running times for each available program.
Program
Level
Description
Monday - Friday
Saturday/Sunday
P1
Low
09:00-17:00
Routine
00:00 to 06:30
08:30 to 17:00
22:30 to 23:59
00:00 to 07:30
10:00 to 12:00
14:00 to 17:00
22:30 to 23:59
High
06:30 to 08:30
17:00 to 22:30
07:30 to 10:00
12:00 to 14:00
17:00 to 22:30
P2
Low
Office
00:00 to 06:00
17:00 to 23:59
00:00 to 23:59
High
06:00 to 17:00
-
P3
Low
Commercial
Routine
00:00 to 06:00
22:00 to 23:59
High
06:00 to 22:00
P4
Low
Constant Heat
-
-
High
00:00 to 23:59
P5
Low
Frost Protection
00:00 to 23:59
High
-
-
UP
User program – Runs at times defined by the user
LEV0549_ECOPANELS_Instructions Manual.indd 5
03/07/2018 14:17
