Leuze BCL 900i, Руководство пользователя

Страница: 15 / 54

EN
15
Laser safety notices
ATTENTION, LASER RADIATION – CLASS 2 LASER
PRODUCT
Do not stare into beam!
The device satisfies the requirements of IEC/EN 60825-1:2014 safety
regulations for a product of laser class 2 and complies with 21 CFR
1040.10 except for conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8, 2019.

Never look directly into the laser beam or in the direction of reflected
laser beams!
If you look into the beam path over a longer time period, there is a
risk of injury to the retina.

Do not point the laser beam of the device at persons!

Interrupt the laser beam using a non-transparent, non-reflective
object if the laser beam is accidentally directed towards a person.

When mounting and aligning the device, avoid reflections of the laser
beam off reflective surfaces!

CAUTION! Use of controls or adjustments or performance of proce
-
dures other than specified herein may result in hazardous light expo
-
sure.

Observe the applicable statutory and local laser protection regula
-
tions.

The device must not be tampered with and must not be changed in
any way.
There are no user-serviceable parts inside the device.

Repairs must only be performed by Leuze electronic
GmbH + Co. KG.

The bar code reader emits a moving laser beam that scans the read
-
ing field. Here, the laser is operated in CW mode. A scanning laser
beam in CW mode creates the perception of repeating laser
impulses if you inadvertently look into the beam. In this case, the
average laser power entering the eye is <1 mW.
1