19
Image settings
Image menu
Figure 10
Image menu
The image menu allows adjusting image settings (e.g. regions of interest), watch the live images and
handle the ringbuffer.
Image settings
Figure 11
Image settings menu
The image settings menu allows configuring the sensor. The subsequent text describes all settings.
6.3.2.1
General remarks
When you enter the page, you will see a warning message.
Figure 12
Warning shown on page reload
The image you see in image settings mode, is a full screen image (all sensor pixels shown), regardless
which image region of interest (ROI) is used. This is done to allow selecting arbritary ROI for acquisition,
white balance and gain.
Switching the sensor and the acquisition to full screen mode needs some time, so this warning is shown.
The warning message may disappear before the live image is shown.
When you leave the page and enter e.g. the live image page, sensor and acquisition must be
reconfigured. This again needs several seconds.
