Leuze 50117911, Оригинальная инструкция по эксплуатации

Страница: 156 / 231

Starting up the device - RS 485 Modbus interface
Leuze electronic GmbH + Co. KG CML 730i 156
Configuration for block evaluation of beam areas (group 12)
Parameter Index
(hex.)
Response Data
type
Access Value
range
Default Explanation
Configuration of switch
-
ing output pin 2
54 4 bytes, configu
-
ration output 1
RW Four different time functions can be set. Max.
adjustable time period is 65 sec. Output has to be
assigned to a beam area 1 … 32.
Operating mode of time
module
54 t08U RW 0 … 4 0 0: Not active
1: Start-up delay
2: Switch-off delay
3: Pulse stretching
4: Pulse suppression
Time constant for
selected function
54 t16U RW 0 … 6553
5
0 Unit: ms
Area mapping 54 t32U RW 0 … 4294
967295
1: For
DO1
2: For
DO2
4: For
DO3
8: For
DO4
Logical OR link mask of the switching outputs
Digital switching output
pin 5
55 4 bytes, configu
-
ration output 2
RW Four different time functions can be set. Max.
adjustable time period is 65 sec. Output has to be
assigned to a beam area 1 … 32.
Operating mode of time
module
55 t08U RW 0 … 4 0 0: Not active
1: Start-up delay
2: Switch-off delay
3: Pulse stretching
4: Pulse suppression
Time constant for
selected function
55 t16U RW 0 … 6553
5
0 Unit: ms
Area mapping 55 t32U RW 0 … 4294
967295
1: For
DO1
2: For
DO2
4: For
DO3
8: For
DO4
Logical OR link mask of the switching outputs
In this group, a detailed area configuration can be displayed and a beam area configured for the
block evaluation.
Parameter Index
(hex.)
Response Data
type
Access Value
range
Default Explanation
Configuration of area 01 64 14 bytes info
area 01
RW Configuration of area 01: definition of the status
conditions so that the area takes on a logical 1
or 0. For diagonal- or crossed-beam mode, the
numbers of the logical beams are to be entered.
Area 64 t08U RW 0 … 1 0 0: Not active
1: Active
Active beam 64 t08U RW 0 … 1 0 0: Light switching (beam is active if light path is
free)
1: Dark switching (beam is active if light path is
interrupted)
Start beam of area 64 t16U RW 1 … 1774
65534
65533
65532
65531
1 Dynamic start positions are created by means of
entries in the form of impossible beam numbers.
65534: First interrupted beam (FIB)
65533: First not interrupted beam (FNIB)
65532: Last interrupted beam (LIB)
65531: Last not interrupted beam (LNIB)
End beam of area 64 t16U RW 1 … FFE
E
1
Number of active beams
for area ON
64 t16U RW 0 … 1774 0