Leuze electronic Smartcamera redCAM, Общее руководство, Страница: 7 / 27

Leuze electronic
Leuze electronic redCAM General Manual 7
2 INSTALLATION
The installation program guides you through the installation. The program copies the
files to an existing folder on your hard disk, alternatively the folder might be newly
created. In addition to that an entry for the Windows95 start menu is created. We re-
commend to create a link to the program on your desktop in order to accelerate the
start of the parameterizing software. For Barcode and DataMatrix Reader there is no
parameterizing program available currently.
System requirements
- Hardware and software requirements:
· Windows95, Windows98 or WindowsNT
·
486 or Pentium based system
·
Mouse or track ball
·
VGA graphics adapter
·
Minimum 16MB RAM for Windows 95 (more for higher Windows versions)
·
Approx. 5MB available hard disk space for installation of the files
· A free serial interface on the PC
An additional monochrome screen (or RGB screen) for the video display of the vision
sensor. A VGA screen is not suitable for video display.
- Back-up copies
The software is provided on CD-ROM. You should make a back-up copy of the original
CD-ROM, in order to be able to continue your work in case the original CD-ROM gets
damaged. Use the back-up copy for installation and keep the original CD-ROM in a
safe place.
- Installation
The files are compressed. Thus, you cannot copy the files manually to your hard disk.
An installation program facilitates the installation procedure.
This program is started from the CD-ROM drive of your PC. For most systems the
drive name is D:. The following installation instructions refer to D: as the drive name of
your CD-ROM drive.
How to install on your PC:
· Insert the CD-ROM containing the programs Completeness, Measurement, Reader
or Barcode into the CD-ROM drive of your PC
·
Select the start button on the windows task bar and then Run. Insert source drive,
path and then SETUP into the dialog box.
·
D:\SETUP.EXE
·
Follow the instructions given in the various dialog boxes of the installation program
and store the program in a folder of your own choice. After completion of the in-
stallation you can start the program like every other program under Windows.