Leuze electronic MLC 500 Series Скачать руководство пользователя страница 20

Страница: 20 / 60

Mounting

Leuze electronic

MLC 520S

Depending on the specified values you can work with the above-mentioned table in three ways:

1. Given are:

• Height a of the point of operation

• Distance S of the point of operation from the safety sensor, and additional distance C

To be determined is the required height b of the upper beam of the safety sensor and thereby its protective
field height.

Look for the line with the specification of the point of operation height in the left column.

In this line, look for the column with the next highest specification for additional distance C

The required height of the upper beam of the safety sensor is up top in the column head.

2. Given are:

• Height a of the point of operation

• Height b of the upper beam of the safety sensor

To be determined is the required distance S of the safety sensor to the point of operation and thereby addi-
tional distance C

In the column head, look for the column with the next lowest entry for the height of the upper beam of
the safety sensor.

Look for the line with the next highest specification of the point of operation height a in this column.

In the intersection point of the line and the column, you will find additional distance C

3. Given are:

• Distance S of the point of operation from the safety sensor, and additional distance C

RO.

• Height b of the upper beam of the safety sensor

To be determined is the permitted height a of the point of operation.

In the column head, look for the column with the next lowest entry for the height of the upper beam of
the safety sensor.

Look for the next lowest value for real additional distance C

in this column.

In this line, go to the left column: here you will find the permitted height of the point of operation.

Now calculate safety distance S using the general formula acc. to ISO 13855 (see chapter 6.1.1 "Cal-
culation of safety distance S").

The larger of the two values S

and S

is to be used.

Содержание MLC 500 Series





























































Результаты поиска

Содержание MLC 500 Series

Отзывы:

Похожие инструкции для MLC 500 Series

Бренды по названию

Популярные бренды

Leuze electronic MLC 500 Series, Безопасная эксплуатация и управление

Результаты поиска

Содержание MLC 500 Series

Отзывы:

Похожие инструкции для MLC 500 Series

Бренды по названию

Популярные бренды