Leuze electronic LCAM 408i Скачать руководство пользователя страница 3

 

Canadian department of communications statement  

This  digital  apparatus  does  not  exceed  the  Class  B  limits  for  radio  noise  emissions  from  digital 

apparatus  set  out  in  the  Radio  Interference  Regulations  of  the  Canadian  Department  of 
Communications. 

This class B digital apparatus complies with Canadian ICES-003. 

 

SAFETY INFORMATION 

Electrical safety 

To  prevent  electrical  shock  hazard,  disconnect  the  power  cable  from  the  electrical  outlet  before 

reloading the system.  

When adding or removing devices to or from the system, ensure that the power cables for the devices 

are  unplugged  before  the  signal  cables  are  connected.  If  possible,  disconnect  all  power 
cables from the existing system before you add device. 

Before  connecting  or  removing  signals  cables  from  motherboard,  ensure  that  all  power  cables  are 

unplugged. 

Make sure that your power supply is set to the correct voltage in your area. If you are not sure about 

the voltage of the electrical outlet you are using, contact your local power company. 

If the power supply is broken, do not try to fix it by  yourself. Contact a qualified service technician or 

your retailer. 

 

Operation safety 

Before installing the motherboard and adding devices on it, carefully read the manuals that came with 

the package. 

Before using the product, make sure all cables are correctly connected and the power cables are not 

damaged. If you detect any damage, contact your dealer immediately. 

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots sockets and 

circuitry. 

Avoid  dust,  humidity,  and  temperature  extremes.  Do not  place  the  product  in  any  area  where  it  may 

become wet. 

Place the product on a stable surface. 

If  you  encounter  technical  problems  with  the  product,  contact  a  qualified  service  technician  or  your 

retailer. 

 

RECYCLING 

Please recycle packaging environmentally friendly: 

Packaging  materials  are  recyclable.  Please  do  not  dispose  packaging  into  domestic 
waste butrecycle it. 

 

Please recycle old or redundant devices environmentally friendly:  

Old devices contain  valuable recyclable materials that should be reutilized. Therefore please 
dispose old devices at collection points which are suitable. 

Содержание LCAM 408i






















Отзывы: