Leuze
electronic
Short instructions IT 6300
Leuze
electronic
Page
9
Configuration for the Leuze standard protocol
Leuze standard protocol:
RS 232 with 9600 baud, 8 data bits, 1 stop bit, no parity, prefix STX and postfixes CR/LF
Factory setting
Return the IT 6320 to the base station to apply the settings. This procedure is concluded
with audible confirmation signals.
To configure the device, please scan the codes in the specified order.
The read operation is confirmed by an audible signal.
RS 232 interface
c
RS 232 baud rate: 9600 baud
d
Prefix STX
e
The setup tool must be used in order to configure the prefix.
The following settings must be performed:
•
Activate
the
Formatting Enabled
check box.
•
Please
enter
\002
in the Leading Text field.
•
Select
Full string
and click
Add
.
•
Activate
the
CR/LF
check box.
