5.5 IT 1910i to USB interface (keyboard emulation)
The operation of the IT 1910i in keyboard-wedge mode on a USB port is described in this chapter. A PC
keyboard is emulated in this operating mode. The data which are read in are written directly to the currently
activated program. Thus, the data can be processed further in all standard programs.
Required parts:
1x
50122436
IT 1910i ER-3
1x 50114521
KB USB-1 IT190x
or
50114523
KB USB-2 IT190x
Please connect the IT 1910i acc. to the adjacent figure.
To do this, proceed as follows:
1. Plug the IT 1910i hand-held scanner into a free USB port.
2. The scanner acknowledges this connection with an acoustic
signal.
3. Scan the code shown below.
4. The standard keyboard driver is then installed.
5.5.1.1
Configuration
USB keyboard emulation with CR LF
Leuze electronic
IT1910i
18
