![Leuze electronic ERS200 Series Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/leuze-electronic/ers200-series/ers200-series_operating-instructions-manual_1884021023.webp)
Mounting
24
ERS200 Leuze
electronic
6.2
Mounting the E-Stop Rope Switch
Prerequisites for mounting:
• actuator head has been set
ª
Select the mounting locations so that the following conditions are satisfied:
• maximum rope length is not exceeded (see figure 6.2)
• E-Stop Rope Switch is not subject to any physical shocks or vibrations
• rope can be easily accessed by operating personnel in the entire operating
area
• pulling the rope in any direction triggers an E-Stop
• the occupied area is visible along the entire rope length from the location of
the E-Stop Rope Switch
• rope is aligned with the axis of the E-Stop Rope Switch button (if applicable,
to the first deflection roller)
ª
Position the E-Stop Rope Switch button so that it is aligned with the direction
of the rope.
ª
Position the washers and screw down the E-Stop Rope Switch with 2–3 Nm.
ª
Secure stud bolt or support for rope clamp with eyelet.
ª
If necessary, mount deflection rollers.
ª
If necessary, mount eye bolts as rope guides at intervals of 2–3 m.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]