Leuze electronic DCR 248i страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 115

background image

Device description

Leuze electronic

DCR 248i

10

3

Device description

3.1

Device overview

3.1.1

About the DCR 200i code reader

The code readers of the DCR 200i series are camera-based code readers for all commonly used bar
codes, stacked codes and Data Matrix codes (e.g. Code 128, EAN 8/13, ECC200, QR etc.) as well as for
codes of the GS1 DataBar family.

The extensive options for device configuration via control buttons, configuration codes or software enable
adaptation to a multitude of reading tasks. The high resolution in combination with a very high depth of field
as well as the compact design make the device ideal for use in packaging machines.

Code readers of the DCR 200i series perform numerous tasks in industrial code reading such as:

• Omnidirectional code reading

• Reading of codes while at a standstill or in motion

• Manual reading by holding up codes

• In packaging machines

• In automatic handling and testing machines

The DCR 2xxi code readers are available in several optics models:

• DCR 2xxi with High Density optics (N-optics)

• DCR 2xxi with Medium Density optics (M optics)

• DCR 2xxi with Low Density optics (F optics)

The DCR 2xxi code readers are operated as a “stand-alone” single device with individual IP address in an
Ethernet star topology.

Information on technical data and characteristics: see chapter 15 "Technical data".

3.1.2

Performance characteristics

• Decoding of 1D-, stacked- and 2D-codes

• Maximum depth of field and reading distance of approx. 40 mm … 360 mm

• High object speed and decoding performance of up to 7 m/s with 10 decodings

• Reference code comparison

• Quality evaluation of 1D bar codes and 2D-codes in accordance with ISO/IEC 15415 and ISO/

IEC 15416

• Integrated process interfaces RS 232, RS 422, Ethernet and PROFINET

The MA 2xxi modular connection units are available for connecting to other fieldbus systems, e.g.,
PROFIBUS, EtherCAT, etc.

• Four freely programmable switching inputs/outputs for the activation or signaling of states:

• 1 switching input

• 1 switching output

• 2 switching inputs/outputs

• Integrated red LED illumination for illumination of the rectangular read field

• Green feedback LED for direct acknowledgment of whether the read process was successful

• Two control buttons for intuitive operation without PC

• Industrial design: degree of protection IP 65 acc. to EN 60529

• Diverse mounting options with mounting threads on rear and side surfaces

• Variously coded M12 connections for unique assignment of the connections:

• Voltage supply, RS 232/RS 422, switching inputs/outputs

• Ethernet/PROFINET connection

• webConfig, a web-based configuration tool for configuration of all device parameters

No additional configuration software necessary

«
...
8
9
10
11
12
...
»

Содержание DCR 248i




















































































































Отзывы:

Нет отзывов

Похожие инструкции для DCR 248i

Бренд: Magnat Audio Страницы: 64

Бренд: H&S Страницы: 32

Бренд: Glasdon Страницы: 8

Бренд: StarTech.com Страницы: 10

Бренд: Jensen Страницы: 18

High IOPS SSD PCIe Adapters

Бренд: IBM Страницы: 9

Бренд: Cognex Страницы: 35

Бренд: iSimple Страницы: 12

Бренд: Vizualogic Страницы: 44

Бренд: König Electronic Страницы: 48

Бренд: National Instruments Страницы: 84

Бренд: Nextar Страницы: 8

Бренд: CEMO Страницы: 40

SkyGE-400S-PCI-E

Бренд: GodEngine Страницы: 112

Бренд: H&S Страницы: 32

Бренд: IDTECH Страницы: 37

Бренд: Lava Страницы: 8

00124153 MoveData

Бренд: Hama Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды