Leuze electronic BCL 608i Скачать руководство пользователя страница 28

Страница: 28 / 92

Electrical connection

Leuze electronic

BCL 608i

Available on the PWR M12 plug and on the SW IN/OUT M12 socket are four freely programmable

switching inputs/outputs that can be individually adapted to the respective application (see chapter 7.2,

Standalone operation in Ethernet network
During stand-alone operation of the device, the host interface of the superior system is connected to

HOST/BUS IN. Thus, a star structure (Ethernet structure) is possible. Please be certain to select the

correct protocol for the connected components.

Network operation in Ethernet network
In network operation, the superior system (PC/PLC) is connected to the host interface of the device. With

the aid of the switch integrated in the device, the bus connection to the next participant, e.g. another

device, can occur directly via the BUS OUT socket!

7.2

PWR – Voltage supply and switching inputs/outputs 3 and 4

Figure 7.2: PWR, M12 plug (A-coded)

Table 7.1:

Pin assignments - PWR

Supply voltage
Connecting functional earth FE



Ensure that the functional earth (FE) is connected correctly. Unimpaired operation is only guaranteed

when the functional earth is connected properly. All electrical disturbances (EMC couplings) are dis

charged via the functional earth connection.

Switching input/output
The device is equipped with four freely programmable, opto-decoupled switching inputs and outputs

SWIO_1 … SWIO_4.
The switching inputs can be used to activate various internal functions of the device (decoding,

autoConfig, …). The switching outputs can be used to signal the state of the device and to implement

external functions independent of the superior control.
The two switching inputs/outputs SWIO_1 and SWIO_2 are located on the SW IN/OUT M12 socket (see

chapter 7.4). The other two (SWIO_3 and SWIO_4) of the four freely configurable switching inputs/outputs

are located on the PWR M12 plug.

The device does not have its own built-in DHCP server. Please make certain that each partici

pant in the Ethernet has its own unique IP address. This can be set by a DHCP server in the

superior system or through manual address assignment.

Name

Comment

VIN

Positive supply v10 ... +30 V DC

SWIO_3 Configurable switching input / output 3

GND

Negative supply voltage 0 V DC

SWIO_4 Configurable switching input / output 4

Functional earth

Thread

Functional earth (housing)

Содержание BCL 608i





























































































Результаты поиска

Содержание BCL 608i

Отзывы:

Похожие инструкции для BCL 608i

Бренды по названию

Популярные бренды

Leuze electronic BCL 608i, Руководство по эксплуатации

Результаты поиска

Содержание BCL 608i

Отзывы:

Похожие инструкции для BCL 608i

Бренды по названию

Популярные бренды