5.5 IT 1911i to USB interface (keyboard emulation)
The operation of the IT 1911 in keyboard-wedge mode on a USB port is described in this chapter. A PC
keyboard is emulated in this operating mode. The data which are read in are written directly to the currently
activated program. Thus, the data can be processed further in all standard programs.
Required parts:
1x
50122434
IT 1911i ER-3
1x
50122431
Base station IT 1911i
1x 50114521
KB USB-1 IT190x or
50114523 KB USB-2 IT190x
1x
50123862
Power supply unit
Please connect the base station acc. to the figure below.
To do this, proceed as follows:
1. Connect the cable for the base station to a free
USB port.
2. The scanner acknowledges this connection with
an acoustic signal.
3. Scan the code shown below.
NOTICE
To charge the IT 1911i, the power supply unit must be
plugged in and the hand-held scanner placed in the
base station.
5.5.1.1
Configuration
USB keyboard emulation with CR LF
Return the IT 1911i to the base station so that the settings can be
accepted. This procedure is concluded with an acoustic signal.
Leuze electronic
IT1911i
20
