Leupold RX-1600i TBR/W, Полная инструкция по эксплуатации

Страница: 29 / 40

26
To activate the appropriate ballistics group, TBR must be activated and you must
choose between BAS, HOLD, MIL, or MOA . Once this has been done, pressing the
MODE button will allow you to select the appropriate ballistics group . GRP (Group)
will be shown in the upper display, and the current ballistics group will
be shown in the lower display . Press and release POWER repeatedly
to scroll through the available ballistics groups . Press MODE to
save the selection and move on to activate or deactivate Wind by
pressing and releasing POWER .
Pressing mode after your ballistic group has been selected will allow
you to activate or deactivate the wind hold feature .
When activated, the rangefinder will first display the distance to the target then show
the appropriate wind hold for the selected output . If the selected output is TRIG,
LOS, or BOW, wind cannot be activated .
Selected Output (TBR): Wind Value Shown in:
BAS MOA
HOLD (YD/m) IN/cm
MIL MIL
MOA MOA