Letterbox Sentry FG1, Руководство пользователя

Страница: 10 / 22

9
LETTERBOX SENTRY TG1/FG1 (revision. 1.0)
DC Adaptor (FG1 Only)
Plug in the supplied DC power adaptor into a nearby AC outlet and insert the
connector into the DC socket on the side of the FG1 unit, then turn the
connector clockwise to lock it in place.
If a mains power socket is not close enough, only a single socket mains
extension should be used.
To remove the DC plug from the unit, first turn the connector anti-clockwise
to unlock it before pulling it out of the unit.
In the event that the FG1 unit does not have DC power supplied, its vapour
sensing functionality will be turned off, however the unit will continue to
operate on its installed batteries, locking and unlocking at its scheduled
times.
When replacing the batteries, ensure that they are replaced with good
quality, high-capacity Alkaline AA batteries.
Do not install the battery cells backwards, do not charge, disassemble, short
circuit, put in a fire or mix with used or other battery types as this may lead
to explosion or leaking, causing injury.
Do not short circuit the battery pack.
Never use any power adaptor other than the Letterbox Sentry
TM
supplied
adaptor. Use of a different adaptor could cause malfunction, fire or electric
shock.
Children should be supervised to ensure that they do not play with the unit or
the flex.
IMPORTANT
CAUTION
3 – Power