background image

– 5 –

G

ear

W

aGOn

™ 125

 

S

pOrT

 p

erfOrMance

 T

railer

GW 1125-9/12

Hitch, Ball, Wire Plug

GearWagon 125’s can be pulled with any tow rated vehicle and receiver (Class I on up).  Never exceed your vehicle’s tow 

limit, as specified by your vehicle and hitch manufacturer’s rating.  See page 3 for trailer weight and load ratings.

The optimal ball height is 17 inches from the ground. Coupling the trailer at the 

designed height will insure that the trailer floor is level in orientation to the ground.

The GearWagon 125’s coupler fits a 2” size ball. Make sure that the ball used is 

matching in size and is rated equal to or greater than the towing load.

GearWagon 125 uses a four-flat connector plug. Vehicles with a round pin plug should source a wire plug adaptor.

Lid and Endgate Operation

Opening and Closing

Use the lid handle for opening and closing tonneau style lid.  

Release the gas shock by pressing in when closing lid 

(GearWagon 125 Camper model). Rotate draw latches 

inside trailer to open and close endgate. The endgate 

may fold to the ground by releasing the cable carabiners.

Endgate Weight Rating

The endgate supports 400 lbs of weight for sitting.  It is not designed

for load bearing weight as a ramp. For heavy wheel items like ATVs, a ramp should be used.

Securing Trailer for Transit

For security, two Locks with a sets of keys are included. To apply locks, first 

close Lid and secure Lid Latch. Remove lock from pin and insert pin through 

hole located at the lip where lid and base overlays.  Apply Lock by inserting into

 pin 

(we recommend applying lock above the lid as shown in photo). 

At a notched location, turn key counter clockwise to lock; turn key clockwise to 

unlock. 

Be sure that lock is engaged 

after removing key

 (pull on lock). 

Weight and Load Ratings

The Gross Vehicle Weight Rating (G.V.W.R.) for the GearWagon™ 125 trailer is 1,480 lbs (672 kilos), and is calculated 

as follows:

The Empty Weight of the Trailer (480 lbs/218 kilos) + the maximum payload the trailer can carry (1,000 lbs/455 kilos) 

=1,480 lbs/672 Kilograms G.V.W.R.

WARNING

Lock down lids using either one or both pin locks 

before transit. Failure to do so may result in property 

damage under extreme road or weather conditions.

Содержание GearWagon 125 Camper


















Отзывы: