BigBoss HOODie™
Accessory Cover For BigBoss Model Racks
Part No. H01496
ASSEMBLY AND OPERATION
Unfold your BigBoss HOODie and drape over top of your BigBoss Carrier and any stored cargo. Fit the
thick Waist-Band of the HOODie snuggly over the corners of the carrier. Tighten and connect the
adjustable
Release Buckle located underneath the
hook and loop fastener
storm flaps until taut.
Pull the long Support Straps around the underside of the carrier and back to meet at the top. Connect the
Release Buckle and pull tight to secure your HOODie and cargo to the carrier.
Unfold the included DragNet and drape over top the secured HOODie. Fasten all Molded Clips by securing
and evenly spacing them to anchor points located on the underside of the carrier.
PARTS LIST
Qty Description
1
HOODie Cover
1
DragNet Cargo Netting With Clips
HOODie & DragNet devices are a weather-
resistant (not water-proof) cargo protectant
system, and not a cargo restraint.
Be sure to remove your DragNet and
completely loosen and disconnect all
HOODie Release Buckles first before
removing the HOODie off your cargo carrier
to avoid damage to your product.
WARNING
WARNING
Always check that HOODie, DragNet & stored cargo are fully secured to the carrier before transit
to avoid loss or damage to your product & cargo. Multiple tie-down and strap positions are located
along the BigBoss Cargo Carrier for supplemental ratchet and tie-down restraints when necessary.
WARNING
Warranty Statement:
HOODie Cover and DragNet are warrantied to be free of manufacturer defect.
Look through our comprehensive collection of trailer hitches & towing right away.
