Q
R
S
B
G
STEP 6
TOOLS: 4mm ALLEN WRENCH, 10mm SOCKET WRENCH WITH EXTENSION.
Attach end panel assembly as shown using eight
[
Q
,
R
,
S
]. Repeat for the second end panel as
-
sembly. By hand, insert end cap [
G
] into shank
tube [
B
].
IMPORTANT FINAL STEPS:
1. Now that all parts are “assembly fitted” into place tighten all nuts and
bolts securely.
2. Peel back and apply Red Reflector Strips [
T
] as shown.
BIGBOSS™ GUIDELINES
The BigBoss™ Cargo Carrier’s maximum load weight is 300 lbs. Always load cargo in center of the carrier be sure that it is secured
from shifting before traveling. Do not exceed this carrying capacity. Do not exceed the receiver hitch manufacturer’s tongue weight rat
-
ing.
Do not use this rack and accessories for purposes other than those for which they were designed. Failure to follow the guidelines of the
product’s instructions will void the warranty.
