Page 6 of 6
SAFE USE OPERATION
Be sure to follow these guidelines to prevent possible hazards from misuse.
Vehicle and Hitch Receiver Compliance
This GearSpace Cargo Carrier fits 2" size hitch receivers and is rated for a Class II tow capability or higher. Before
using this product, consult your vehicle and hitch receiver owner manual(s) for details on your tow and tongue weight
parameters. Be sure that they are compatible with GearSpace’s weight specifications.
Tongue Weight Compliance
The GearSpace and its cargo create a combined weight that creates direct downward pressure on the hitch receiver’s
tongue. This downward pressure is the tongue weight. Tongue weight is one of the two critical weight rating factors of
your tow rating’s classification.
Never exceed your vehicle and hitch receiver’s tongue weight specification.
GearSpace Weight and Load Parameters
The GearSpace weighs 140 lbs unloaded. To determine your available load weight in accordance with your vehicle and
hitch receiver’s tongue weight rating, subtract GearSpace 34’s 140 lbs from your identified tongue weight rating. The
difference represents your vehicle and hitch receiver’s available load weight.
The GearSpace® is rated for up to 300 lbs of cargo weight carrying capacity for a combined weight of 440 lbs when
fully weight loaded.
Sliding Out GearSpace Cargo Carrier & Clearance Adjustability
To telescope the GearSpace remove the Hand Tighten Silent Hitch Pin® from the Telescope Safety pin hole. Verify that
the Safety Cable is secured and then slide the frame to the rear. For added clearance, be sure to adhere to NO USE
AREA distance of 3.5 inches rearward from Spine’s vertical plate along the frame tubes.
Lighting
Check running lights, brake lights, and turn signals before operation. Check the wire harness for good connections and for
possible fraying or wearing of insulation if a light signal is not functioning. Check lights before each use.
Locking Up GearSpace
A stainless steel locking pin is included for locking down the GearSpace. The locking pin hole is located on the rear side
of the carrier for easy accessibility. A second pin hole is tapped on the front side of the carrier (facing the vehicle’s rear) for
use with a secondary lock, which is optional.
TECHNICAL SUPPORT
For assistance with this product and for replacement parts, contact Let’s Go Aero at 877-464-2376 or email Support@
LetsGoAero.com.
WARRANTY & REGISTRATION
We warrant this product to the first consumer to be free from defect in material and workmanship for one year (Please
retain your sales slip for your records). Any product or part thereof found to be defective within that period will be replaced
without charge provided that: (1) the product was not misused; (2) no alterations or modifications were made; (3) its failure
resulted from a defect in material or workmanship and not from normal wear expected in the use of the product; (4) the
product or part is delivered, freight prepaid, to Let’s Go Aero. Please contact Let’s Go Aero, toll free, at 877-464-2376 to
get a return authorization number prior to return. Manufacturers only obligation shall be to replace such products or parts
proved to be defective.
To register your product, visit the Let’s Go Aero website at www.LetsGoAero.com
Patent and trademark protected. Patent Numbers 6,409,203; 6,609,725; 6,945,549; 8,079,613; D717718
Copyright 2017, Let’s Go Aero Inc.
