Page 3 of 6
With the bicycle rear tire
resting against the Rear
Wheel Stop’s “Peg”,
stretch the Adjustable
Rubber Strap with
the Hammerhead end
through the tire and
reconnect to a hole
position that is one hole
tighter than unstreched
[Figure 9 & 10].
NOTE:
The Adjustable
Strap should be taut
with absolutely no slack.
Operation:
To avoid loss/damage to products/bicycle as well as personal injury, always confirm the
Fork Mount Assembly, Rear Wheel Stop and Bicycle are fully secured before transit.
Do not use this product for purposes other than those for which they were designed.
Failure to follow the guidelines of the product’s instructions will void the warranty.
Never allow the total width of the Fork-IT mount appartus and bicycles to exceed past the
width of the tow vehicles mirrors.
Keep equipment away from vehicle’s hot exhaust flow by at least 6 inches.
WARNING
WARNING
WARNING
WARNING
PEG
PEG
ADJUSTABLE
STRAP
ADJUSTABLE
STRAP
