BIKEWING-T4 GUIDELINES
The BikeWing-T4 bicycle carrier’s maximum load weight is 180 lbs. Do not exceed this carrying capacity. Do not exceed the receiver
hitch manufacturer’s tongue weight rating.
Do not use this rack and accessories for purposes other than those for which they were designed. Failure to follow the guidelines of the
product’s instructions will void the warranty.
Keep bicycle tires away from vehicle’s hot exhaust flow by at least 6 inches.
ONE YEAR LIMITED WARRANTY
Let’s Go Aero warrants this product to be free from defect in material and workmanship for one year (retain your sales receipt for your
records). Any product or part thereof found to be defective within that period will be replaced without charge provided that: (1) the prod-
uct was not misused; (2) no alterations or modifications were made; (3) its failure was not a result of normal wear expected in the use of
the product; (4) the product or part is delivered, freight prepaid, to Let’s Go Aero. Manufacturers only obligation shall be to replace such
products or parts proved to be defective. A Return Merchandise Authorization is required prior to return. Please contact Let’s Go Aero
toll-free, at 877-464-2376 or 719-630-3800, or via e-mail to [email protected] to get an RMA number. This warranty terminates
if a purchaser transfers the product to any other person. No warranty is given for LGA products purchased outside of the United States
and Canada.
To register your product, visit the Let’s Go Aero website at www.LetsGoAero.com
Phone: 877-464-2376 or 719-630-3800
E-mail: [email protected]
To learn more about our line of bicycle carriers for vehicle, home storage, and accessory options for carrying fat bikes, snowboards/
skis, and more, be sure to visit our website: www.LetsGoAero.com
U.S. Patent No: D717716; D7177177; D684917; 8,899.456; D722289; Patents Pending
PAGE 6 OF 6
For More Information & Accessories,
Visit our Website - www.LetsGoAero.com
Contact Us at 877-474-2376 or 719-630-3800 | E-mail [email protected]
Copyright © 2017 Lets Go Aero Inc.
2-BIKE CONVERSION
Remove the Wing Set located furthest from the vehicle. Locate the Pin that connects the 2 sections of the Mast together.
Remove Pin, and slide out the Forward Mast [
C2
] section of Mast located furthest away from the vehicle. [DETAIL 20]
NOTE:
Removed Pin and Mast section can be slide into another vehicle hitch and used as a second 2-Bike Carrier.
[DETAIL 21]
NOTE:
Once secondary section is removed, the main section of Mast
can still be tilted down to either ~45 or ~180 degree angle for rear hatch
clearance depending on pin placement. These angles are not usable for
transport. Be sure to tilt your BikeWing back to the upright position before
transit. [DETAIL 22]
NOTE:
The main section of Mast can also be tilted up, closer to the
vehicle for more parking or garage clearance. When Mast and Wing are
tilted up, the Wing remains functional as a one bike carrier.
Review Page 4 for proper
BikeWing Tilt procedure.
45
°
180
°
UPRIGHT
V-BRACE RESTING ON PIN
PIN THROUGH V-BRACE
PIN THROUGH V-BRACE
DETAIL 20
DETAIL 21
DETAIL 22
