23
2. To turn the sound on/off, press and hold the
button and
“–” button for 2 seconds.
The
display will show the ‘sound off’ icon.
10.7 Auto Functions
The device will automatically turn off after 30 seconds if not in use. The Ageless Wonder Facial
Muscle Stimulation System has an auto-timer. It will automatically switch off after the chosen timer
setting. If you change the exercise mode during an e.g. 15 minute exercise period, the timer will
continue to count-down from the original leftover time and not re-start the initial timer setting.
What to do if you do not feel any muscle contractions
If no muscle contractions are felt, move the application wand slowly around the area you want to
target. Make sure the sponge of the application wand is moist to the touch. Gradually increase the
PULSE INTENSITY by pushing the + button until muscle contraction is felt.
The Ageless Wonder Facial Muscle Stimulation System is a great way to tone, lift and firm your face. It
may take a few moments of practice to locate the application wand correctly and apply the ideal
pressure that will produce the best results for you.
11.Troubleshooting
Problem
Cause
Remedy
LCD Display does not light up
at all
- Batteries not
installed
- Batteries installed
incorrectly or
battery tray not
properly locked into
place
- Batteries are dead
-
Install
Batteries
-
Check
polarity “+” sign
-
Remove
the battery tray and re-insert it,
until it locks into place.
A confirmation beep should sound.
-
Replace
Batteries
TIPS
: If the sponge of the application wand is not moist enough, or the skin contact is
not sufficient, you may experience an uncomfortable tingling sensation. The same may
happen if the sponge is worn and needs to be replaced.