Let 'Em Play Wild Thing Adapter, Руководство пользователя

Страница: 9 / 15

DOC ID: L04001A PAGE 8
Operating an adapted Wild Thing™
SWITCH INPUTS
The Wild Thing Adapter has four 3.5mm Mono Jack ports, one port for each direction.
When the switch connected to each port is activated,
the Wild Thing™ moves in one
direction. Forward; Reverse; Left
(spin)
; Right
(spin)
.
Two switches can be activated at the same time, combining their directions. For example,
activating the Forward switch and the Left switch at the same time will make the Wild
Thing
™ move in a sweeping left turn.
Note that it isn’t necessary to connect a switch to all four of the directional ports.
Introduce cause-and-effect with just one switch connected to the Left
(or Right)
Port for
fun, and independent
(!)
, spins!
PROPORTIONAL JOYSTICK INPUT
The Wild Thing Adapter has one 9-pin D-subminiature port that accepts a proportional
joystick compatible with the Trace SET Standard. Proportional Joysticks compatible with
this standard are available from multiple sources online and are also widely used in the
powered mobility device industry.
Proportional joysticks send the direction and position they are moved from their center
position as a varying signal to the control system they are connected to. This performance
makes it is possible to achieve very slow and very fine controlled movements through
small variations in joystick position.
PLEASE NOTE
The inputs of the Wild Thing Adapter are intended for momentary controls signals.
Depressing a switch, or deflecting the joystick starts movement. Releasing the switch or
joystick stops movement. If this behavior is not what you experience, it could indicate a
malfunction in your input device(s)
– inspect them for damage, especially the cables and
connections.
Do not continue to use your adapted Wild Thing™ if it exhibits unusual behavior, contact
the input device manufacturer and/or Let’em Play customer service for assistance.