Local Navigator Bluetooth Base Station
lesswire AG
Page 8
3.3
Inquiry and Change of Parameters
Inquiry of the actual setup of the Local Navigator Bluetooth Base Station is performed
by a standard internet browser (Microsoft Internet Explorer or Netscape). Validity of
the functionality and the network connection is also checked by the browser.
Procedure:
-
Check, whether PC and Base Station are connected with the network and
whether the Base Station is up and running (LED4 is switched on).
-
Start the internet browser on your PC.
-
Type the IP address of the Base Station into the address field of the browser
and press ‘Enter’ or click ‘Go’. The Local Navigator Bluetooth Base Station has
the predefined IP address 172.16.200.86 after shipment.
If the PC can setup a connection with the device, the actual configuration of the Base
Station is displayed by an internet page, as shown by the image 3.3.
Important Notice:
If the Base Station is currently in manual firmware update mode
(LED4 is blinking), access of the configuration is not possible. In
this case, please perform a reset by disconnecting power.
