MOVING OR RELOCATING YOUR LESLIE SPEAKER
So as not to damage your Leslie cables, carefully unplug both ends of the cable before moving your Leslie
speaker. To prevent damage to the cabinet, it is advisable that more than one person move the speaker.
PACKING AND SHIPPING
Packing and shipping should be done by your local Leslie dealer or by a qualified mover. The speaker should
not be moved or carried on its side or upside down, as this will result in damage to the moving parts inside the
cabinet. The cabinet must be moved, carried or shipped in an upright position. The exterior should be
protected by boxing the cabinet or covering it with padding.
SPECIFICATIONS:
Leslie models 122A, 122XB, 147A
- Single-Channel Input
- Amplifier: 40Watt RMS Vacuum tube amplifier
- Two speed horn and drum rotor
- Inputs: Model 122A, 147A – 6-pin Leslie connector
Model 122XB- 11-pin Leslie connector, 1/4” Line Input jack and 1/4” foot switch jack
- Controls: Model 122A – Master Volume control
Model 147A – Master Volume control, Input Selector switch
Model 122XB – Master Volume control, AC power switch
- Speakers: Massive 15” woofer, world-famous Ferro Fluid horn driver
- Dimensions: 41 5/8” H, 29 1/4” W, 20 5/8” D
- Weight: 149 lbs
OPTIONAL ACCESSORIES
Shown below are only a few of the available optional accessories for your new Leslie Speaker. Visit our
website or your local Leslie dealer to view all the available products to enhance your Leslie Speaker.
Model FS-10TL Foot Switch
Enable the selection
of speeds on the 122XB
Leslie. Supplied with a 16’
cord with a 1/4” plug.
Tremolo / Chorale Switch
This half-moon shaped
switch assembly is used to
control the speeds of the
Leslie speaker. Consult
your dealer for the switch
that your organ or Leslie requires.
6-pin and 11-pin Leslie
cable assemblies
These cable assemblies
are available in 30’, 50’
and 100’ lengths.
Leslie Power Relay
This adapter will
allow you to
connect additional
Leslie speakers to
your organ.
www.hammondorganco.com
6
