Lesite
Providing best plastic welding tools
Fuzhou Lesite Plastics Welding Technology Co.,Ltd
Website
：
www.lesiteweld.com
Email: [email protected]
Mob: 86-18650793446
Add:16th building, Juyuanzhou Park,
Jinshan Industry Area, No.618 Jinshan Road
Cangshan Area,
Fuzhou, Fujian, China
Tel:
：
86-591- 83818890
Fax
：
86-591-88211499
2. Precautions
1). For correct operation, please carefully read this instruction.
2). Use with grounded 3-cords mains cable and socket (socket with 10A capacity. On the
corresponding welder, phase L connected to live wire, N to zero line, phase ╧ to grounded
protection line), plug will not be modified without prior permission.
3). For good welding quality, please assign specified personnel for operation.
4). Pressure roller will not engage on free running.
5). Do not operate when it is exposed to water to prevent inferior quality.
6). The machine has been regulated before leaving factory. Please do not adjust it at will.
7). Circuit board in control box is electrified. Do not remove it without prior notice to authorized
personnel.
8). Preheat for 30 minutes before start up if machine has been long unused or exposed to moisture.
9). Modifications may be made for continuous improvement, without prior notice.
3
．
Main Components:
