20
4 Maintenance
4.6 Replacing the light source
Halogen lights 3W/230V with the socket
GU10 (bajonet connection).
For this purpose:
Remove the grease filter(s), which are located
next to the defective light source.
The halogen light is installed and inserted in
clamps. Slightly loosen the knurled screws
(fig.6) and remove the clamps with the lighting
fixture. Replace the defective light. Insert the
clamps and attach the knurled screws.
CAUTION!
When replacing a light or fine fuse, it is
imperative to interrupt the power supply. Pull
the plug of the hood or switch off the main
fuse Otherwise, the risk of an electric shock
can still occur.
Figure 6: Replace halogen lamp