manualshive.com logo in svg

Leprecon LP-X24, Руководство пользователя, Страница: 202 / 228

Поделиться
Скачать
Leprecon LP-X24 Скачать руководство пользователя страница 202

198

Chapter Twelve

Other Setup Features

LP-X24 and LP-X48 Users Manual

For more information about Stack In Fade and Stack Out Fade, please see "Automating
a Stack" beginning on page 161. For more information about Hold Time, Delay and
Fade, please see "Automating a Show" beginning on page 110.

To Modify Stack In Fade and Stack Out Fade

1. From the 

Setup Mode

 screen, press the 

Default

 softkey.

The 

Show Defaults

 screen appears.

Show Defaults

Stack Out Fade:                     0:02:0

Stack In Fade:                      0:02.0

Auto Save Interval (minutes):            5

Timing

2. Use the left wheel to select the 

Stack In Fade

 or 

Stack Out Fade

.

3. Use the right wheel to increase or decrease the value for your selection.

To Modify the Auto Save Interval

1. From the 

Setup Mode

 screen, press the 

Defalt

 softkey.

The 

Show Defaults

 screen appears.

2. Using the left wheel, select 

Auto Save Interval (minutes)

.

3. Using the right wheel, select the desired auto save interval (between 5 and 30

minutes).

To Modify Hold Time, Delay or Fade Defaults

1. From the 

Setup Mode

 screen, press the 

Defalt

 softkey.

The 

Show Defaults

 screen appears.

2. Press the 

Timing

 softkey.

The 

Default Scene Timing

 screen appears.

Содержание LP-X24





































































































































































































































Отзывы:

Нет отзывов