manualshive.com logo in svg

Leprecon LP-X24, Руководство пользователя, Страница: 103 / 228

Поделиться
Скачать
Leprecon LP-X24 Скачать руководство пользователя страница 103

Moving Light Programming

Chapter Four

99

LP-X24 and LP-X48 Users Manual

You repeat this pattern of selecting and deselecting lights over and over as needed
to accommodate (1) the labels that the lights have in common and (2) the differences
in the labels that you want to assign to each light.

5. Select the desired page and then press the 

Select

 button for the desired playback.

The LP-X displays the page, playback and step number information for the look just
recorded.

6. To make changes to the look that you just recorded, repeat step 4 and then press

the 

Save

 softkey.

The LP-X confirms that it saved the new information to the look.

7. To record the next look, repeat step 4 and then press the 

Select

 for the same page

and playback.

The LP-X displays that it saved the information to the new look.

Playing Back Moving Light Looks

The procedure for playing back a moving light look is identical to the procedure for
playing back a conventional look.

To Play Back Moving Light Looks

1. Put the LP-X into the following modes for playback:

Button/Fader

Setting

Modes

Run

 and 

Playback

Bump

Any setting

Master Fader

Up (typically full on)

Manual Fader

Any setting

Programmer Fader

Down

2. Raise the playback to the desired level (typically 100%).

The LP-X displays the first look that you recorded to the playback.

In 

Playback

 mode, you see which playbacks are active and what step number each

is on.

Содержание LP-X24





































































































































































































































Отзывы:

Нет отзывов