Leopard PTZ Camera Module User’s Guide
54
A5. How to use WIFI
If there is an optional WIFI module on your camera board, you can run this camera with WIFI.
For the first time you use the WIFI function, you need to enter IE interface with network cable
and go to
Network Setting
WIFI Access
to enable the WIFI. Then select the WIFI ID and
enter password.
After click
Save
, the camera will reboot.
After the camera boots up, you can get the IP address from the serial log screen ( the WIFI IP
address is behind the IP address from network cable) or the UPnP device of the computer which
connects to the WIFI router (please refer to previous section
Run Demo
).
You can also set the static IP of WIFI.
Go to
WIFI Settings
.
