8
Fiber Port
The fiber port of SC type connector can work in multi-mode or single-mode. When connecting
the fiber port to another one, please follow the figure below to connect accordingly. Wrong
connection will cause the port works abnormally.
Figure 2.8: SC Connector
Caution:
This is a Class 1 Laser/LED product that complies with IEC 60825-1. Don’t stare
into the Laser/LED Beam.
Cabling
Use the four twisted-pair, category 5e, or the above cabling for RJ-45 port connections. The cable
between the switch and the link partner (switch, hub, workstation, etc.) must be less than 100
meters (328 ft.) long.
Fiber segment using single-
mode connector type must use 9/125μm single
-mode fiber cable.
Using multi-
mode connector type must use 50 or 62.5/125μm multi
-mode fiber cable.
