1
Overview
PoE and Non-PoE are both highly utilized in the industrial networking applications nowadays;
however, it sometimes goes to an awkward situation that end-device, e.g. remote camera, supports
PoE function but the Ethernet switch does not. Is there any other solution but replacing the switch
with a PoE one?
GINJ-0201-AT-24 Series, launched by Leonton, solve the problem simply by deploying data and
power from non-PoE switch and power input to the PD device. PoE injector is a brilliant low-cost
solution for the case that only one side of devices is supporting PoE function. Therefore, Leonton’s
GINJ-0201-AT-24 Series will be your best choice to deal with the lack of PoE function cases.
GINJ-0201-AT-24 Series supports low voltage 24VDC model with power booster technology,
ensuring full 30W PoE output, for better usage in the automation industry. GINJ-0201-AT-24 Series
with fan less design, besides extending surely apply to various industrial application,
GINJ-0201-AT-24 Series works perfectly in polarized temperature from -40~75
℃
, and undoubtedly
becomes your best option in the industrial market.
Hardware Features
Interface & Performance
Embedded 1*10/100/1000Tx (PSE 30W) and 1*10/100/1000Tx copper port
Compliant IEEE802.3af/at PoE technologies
Support auto detection and classification for PoE application
Support short-circuit and current-overloading protection for PoE application
The total length from the device A through the Injector to the device B must not exceed 100
meters
Power Input
GINJ-0201-AT-24 Series
■
Redundant power DC 12~55V with connective 1*4-pin removable terminal block
■
Max. current 2.7A (Included PoE power budget)
■
Max. PoE output: 30W
Certification
CE/FCC
Operating Temperature
Standard operating temperature model: -10°C ~ 65°C
Extended operating temperature model (–T): -40°C ~ 75°C