7
Wall Mounting
Follow the steps below to mount the industrial PoE Injector using the wall mounting bracket as
shown below in Figure 3.4.
Caution:
“Wall” means industrial control panel wall.
Step 1
Remove the DIN-Rail bracket from the industrial PoE Injector by loosening the screws.
Step 2
Place the wall mounting brackets on the top and bottom of the industrial PoE
Injector.
Step 3
Use the screws to screw the wall mounting bracket on the industrial PoE Injector.
Step 4
Use the hook holes at the corners of the wall mounting bracket to hang the industrial
PoE Injector on the wall.
Step 5
To remove the wall mount bracket, do the opposite from the steps above.
Figure 3.4: Remove DIN-Rail Bracket from the Injector