Leonton BG2-0500-24 Series Скачать руководство пользователя страница 19

Страница: 19 / 20

Hardware Installation

Installation Steps

This section will explain how to install BG2-0500-24 series.

Installation Steps

Step 1.

Unpack the industrial Ethernet switch from the original packing box.

Step 2.

Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.

•

If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the

DIN-Rail

Mounting

section for DIN-Rail installation.

•

If you want to wall mount the industrial Ethernet switch, please refer to the

Wall Mounting

section for wall mounting installation.

Step 3.

To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the

Mounting

Installation

section.

Step 4.

Power on the industrial Ethernet switch and then the power LED light will turn on.

•

If you need help on how to wire power, please refer to the

Wiring the Power Inputs

section.

•

Please refer to the

LED Indicators

section for LED light indication.

Step 5.

Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.

Step 6.

Insert one side of the RJ-45 cable into Ethernet switch

’s Ethernet port and on the other

side into the networking device’s Ethernet port, e.g. switch PC or server. The Ethernet

port’s (RJ

-45) LED on the industrial Ethernet switch will turn on when the cable is

connected to the networking device.

•

Please refer to the

LED Indicators

section for LED light indication.

Step 7.

Insert one side of the SFP cable into Ethernet switch

’s

SFP port and on the other side into

the networking device’s

SFP port, e.g. switch or server. The SFP

port’s LED on the

industrial Ethernet switch will turn on when the cable is connected to the networking

device.

•

Please refer to the

LED Indicators

section for LED light indication.

Step 8.

When all connections are set and the LED lights all show normal, the installation is

complete.

Содержание BG2-0500-24 Series





















Результаты поиска

Содержание BG2-0500-24 Series

Отзывы:

Похожие инструкции для BG2-0500-24 Series

Бренды по названию

Популярные бренды

Leonton BG2-0500-24 Series, Руководство пользователя

Результаты поиска

Содержание BG2-0500-24 Series

Отзывы:

Похожие инструкции для BG2-0500-24 Series

Бренды по названию

Популярные бренды