Leonard MEGATRON 270, Сервис настройки установки

Страница: 3 / 4

VALVE PARTS LIST
DISMANTLING & CLEANING TROUBLESHOOTING
1. Shut off hot and cold water to the valve as well as the valve
outlet port.
2. Loosen lock screw on side of knob with 5/64” allen wrench.
3. Remove the knob screw on top of knob.
4. Remove temperature adjustment knob.
5. Remove valve cover, which includes the stem assembly.
6. The shuttle assembly can now be removed, cleaned and
inspected. Be sure to check the condition of the shuttle o-ring
and replace if necessary.
7. Lubricate the shuttle o-ring before installing the shuttle
assembly.
8. Install the cover assembly including o-ring back onto valve
and tighten.
9. Replace knob and knob screw.
10. Valve temperature must be reset after any repairs or
cleaning!! See Page 2. Temperature Adjustment
1. Leaking water under knob, order gasket kit, replace stem
assembly o-ring. Remove knob screw and knob, remove
retaining clip, thread out the stem assembly and replace o-ring.
Lubricate o-ring, thread stem into cover, replace retaining ring,
knob and screw.
Valve temperature must be reset after any
repairs or cleaning!! See page 2.
2. Leaking water between cover and body, order gasket kit,
replace cover o-ring. Remove knob screw and knob and remove
valve cover and replace o-ring. Replace valve cover, knob and
knob screw.
Valve temperature must be reset after any
repairs or cleaning!! See page 2.
3. Hot water bypass into cold line, order checkstop kit and replace
checks within inlets of valve.
4. Valve not controlling temperature even after cleaning, order
complete rebuild kit. Remove knob screw and knob and remove
valve cover. Replace shuttle assembly and return spring being
sure to lubricate shuttle o-ring. Replace valve cover, knob and
knob screw.
Valve temperature must be reset after any
repairs or cleaning!! See page 2.
1360 Elmwood Avenue, Cranston, RI 02910 USA
Phone: 401.461.1200 Fax: 401.941.5310
Email: info@leonardvalve.com
WEB: http://www.leonardvalve.com
3
MODEL 270, 370
RETURN SPRING
CHECK
CHECK CLIP (MODEL 270/370 ONLY)
SHUTTLE ASSEMBLY
SHUTTLE O'RING
STEM ASSEMBLY
STEM ASSEMBLY O'RING
COVER O'RING
COVER
RETAINING CLIP
KNOB
SCREW
KNOB SET SCREW
DIAL PLATE
DO NOT REMOVE
SNAP RING ON
STEM - INJURY MAY
OCCUR
MODEL 270
1/ WX Gasket Kit
Shuttle o’ring
Stem assembly o’ring
Cover o’ring
R/ 270/370 Complete Rebuild Kit
Return spring
Shuttle assembly
Shuttle o’ring
Stem assembly o’ring
Cover o’ring
4/220 Check valve Kit
2 Check valves
2 Check clips
MODEL 370
1/ WX Gasket Kit
Shuttle o’ring
Stem assembly o’ring
Cover o’ring
R/ 270/370 Complete Rebuild Kit
Return spring
Shuttle assembly
Shuttle o’ring
Stem assembly o’ring
Cover o’ring
4/320 Check valve Kit
2 Check valves
2 Check clips