Lenze g500-H100 Скачать руководство пользователя страница 18

Страница: 18 / 156

Application as directed

•

The product must only be actuated under the operating conditions and power limits

specified in this documentation.

•

The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.

•

The product is not classed as a machine under 2006/42/EC: Machinery Directive.

•

No machine is to be commissioned or put into operation as intended in conjunction with

the product until it has been determined that the machine meets the regulations of EC

Directive 2006/42/EC: Machinery Directive; observe EN 60204−1.

•

Commissioning or putting into operation as intended is only permitted in compliance with

the EMC Directive 2014/30/EU.

•

The product is not a household appliance. Instead, it is a component that is intended

exclusively for further use in the context of commercial or professional use as defined by

EN 61000−3−2.

•

The product can be used according to the technical data if the drive systems have to

comply with categories in accordance with EN 61800−3.

•

Do not use the built-in brakes as fail-safe brakes. Disruptive factors that cannot be

influenced may cause the braking torque to be reduced.

•

The product is only to be operated together with an inverter.

•

The harmonized standards of the series IEC/EN60034 are used.

Foreseeable misuse

•

Operate directly on the mains voltage

•

Use in potentially explosive atmospheres

•

Operate in aggressive environments (acids, gases, vapors, dusts, oils)

•

Operate under water

•

Operate under radiation

•

Operate in generator mode

Information on project planning

Safety instructions

Application as directed

Содержание g500-H100





























































































































































Результаты поиска

Содержание g500-H100

Отзывы:

Похожие инструкции для g500-H100

Бренды по названию

Популярные бренды

Lenze g500-H100, Проектное планирование

Результаты поиска

Содержание g500-H100

Отзывы:

Похожие инструкции для g500-H100

Бренды по названию

Популярные бренды