Lenze g350-B Series, Проектное планирование

Страница: 22 / 72

Handling
Transport, storage
Comply with the instructions for transport, storage and proper handling. Ensure careful han-
dling and avoid mechanical overloading. Do not bend any components during transport and
handling and do not change the insulation clearances. Do not touch any electronic compo-
nents and contacts. Do not damage or destroy any electrical components as doing so can
cause a health hazard!
The storage location must be free of vibrations and shocks (V
eff
< 0.2 mm/s) in order to avoid
roller-bearing damage when equipment is at a standstill.
When the product is being stored, temperature changes with condensation formation are to
be avoided.
Shafts and bright surfaces are delivered with protection against corrosion.
Installation
The technical data and supply conditions can be obtained from the nameplate and the docu-
mentation. They must be strictly observed.
You must install the product in accordance with the regulations indicated in the associated
documentation. Adhere to the climatic conditions as indicated in the technical data.
Ambient media − especially chemical aggressive media − can attack shaft sealing rings and
paintwork (general plastics). Abrasive media can damage the shaft sealing rings. If this hap-
pens, consult the responsible branch office of Lenze.
Electrical connection
When working on energised products, comply with the applicable national accident preven-
tion regulations.
The electrical installation work must be carried out according to the appropriate regulations
(e. g. cable cross-sections, fuses, PE connection). Additional information can be obtained
from the documentation.
The documentation contains instructions on EMC-compliant installation. Comply with these
instructions in the case of CE-labelled products as well. The manufacturer of the system or
machine is responsible for adherence to the limits required in connection with EMC laws.
operation
Where appropriate, you must equip the system/machine with additional monitoring and pro-
tective devices. Comply with the safety regulations and other regulations applicable at the
place of operation.
After the product has been separated from the supply voltage, refrain from immediately
touching the live parts and power connections of the device because capacitors may have
been charged. Take note of the corresponding information plates on the product.
Deposited dirt or dust prevent head dissipation (cooling). Remove any such deposits at regular
intervals.
Maintenance and servicing
The products are maintenance-free if the prescribed conditions of use are complied with.
Disposal
The products and accessories must be properly disposed of in accordance with the applicable
regulations. The products contain raw materials that can be recycled such as metals, plastics
and electronic components.
Project planning
Safety instructions
Handling
22