Lenze g350-B Series, Проектное планирование

Страница: 13 / 72

Adjusting with a PC
With the EASY Starter engineering tool (expanded version, "EASY Advanced" or "Engineer
HighLevel" software licence needed) can be used to adjust the Lenze Smart Products. The rel-
evant version can be easily downloaded from www.Lenze.com. As the settings are very simple
and clear, there is an easy-to-use dialog box, which can be opened directly via the Navigator.
The corresponding button is directly accessible in the Navigation bar. Analogously to other
product settings, the parameter values. can be archived.
Starting and stopping smoothly and gently
An acceleration ramp and – in contrast to a conventional starter – a deceleration ramp can be
set for Lenze Smart Products. This ensures that the conveyed material is handled in a defined
and jerk-free manner..
Contactor and motor protection functions integrated
The Lenze Smart Products can be started and stopped by mean of digital inputs. It is also pos-
sible to switch between different speeds and rotating directions. Up to 5 different speed
modes (e.g. creep speed and normal speed in both directions as well as stopping) can be used
for a motor. Reversing-contactor changes and pole changes are thus a thing of the past.
In addition, motor-protections devices are not needed as monitoring of temperature, short
circuits, earth faults and phase failures has already been integrated.
Easy installation
Connection takes place completely from the outside by means of connectors.
The Lenze Smart Products come with an especially clever connecting technology – Phoenix
Contact QUICKON. Electrical installation is therefore very easy without special tools and
requires less than one minute.
As a standard feature, the digital inputs and outputs are connected at M12 sockets of the type
currently available on the market.
Already existing signal cables can often be reused.
Worldwid and efficient
The drive can be used worldwide:
•
In all 3-phase networks with 400 ... 480 V and a supply voltage of 50 ... 60 Hz.
•
In ambient temperature of -30 ... +40 °C.
•
Is suitable for many approvals.
With IES2, the Lenze Smart Products fulfil the highest efficiency requirement.
If very little torque is needed in the partial-load operational range, the integrated energy-sav-
ing function intervenes and improves the energy consumption.
Product information
Product description
13