Commissioning
Commissioning using Lenze settings
EDK82ZAFBC−001 DE/EN/FR 7.2
43
l
H1inbet−INB_01_warn
Commissioning using Lenze settings
)
Note!
ƒ
The controller is only ready for operation if a HIGH signal is applied to
X3/28 (controller enable via terminal).
– Please observe that the controller can be inhibited through various
sources. All sources act like a series connection of switches.
– If the drive does not start although the controller has been enabled via
X3/28, check whether the controller has been inhibited through a
different source. Another source could be the
s
key of the keypad.
