Mechanical installation
Mounting steps
Fixing the mounting frame to the wall
5
31
BA_CS9000DVI EN 4.0
With add−on component
29.
5
10
6
70
1
6
0
2
1
6
0
0
2
3
3
4
5
1
4
3
4
CS57x0−011
How to proceed:
1. Prepare the wall for mounting the wall bracket
.
– The mounting location and the installation material must provide for a permanent
mechanical connection.
2. Stick the self−adhesive seal
on the adapter plate
on the side with the threaded
bolts.
3. Screw the wall bracket
and the adapter plate
to the swivel adapter
.
– 2 x 4 countersunk head screws M5 x 16 mm with washers
Æ
5.3 mm and nuts M5
4. Pull the connecting cable through the swivel adapter
and screw the swivel
adapter to the wall.
5. Screw the add−on component
to the threaded bolts of the swivel adapter
.
– 4 spacer bolts
on the inside/outside M5 x 20 mm
6. Stick the second self−adhesive seal
on the add−on component
.
7. Screw the mounting frame
to the add−on component
.
– 4 nuts M5 with washers
Æ
5.3 mm
– 4 screws M5 x 8 mm with washers
Æ
5.3 mm
Now you can connect the Command Station (
33).
