4
KFZ_Zeichen_EN−M−Install_WiHis_c300
Lenze ¯ MA_c300 ¯ 8.0
¸
,
Please read these instructions and the controller reference manual before you
start working.
Observe the provided safety instructions!
I
Tipp!
Information and tools concerning the Lenze products can be found in the
download area at
www.lenze.com
These instructions are valid for:
CabinetController c300:
C30GAC00000F3G
x
XXX−0200C300000
Optional interface
0 = none
8 = PROFINET
(
Stop!
Depending on the system, sporadic cycle time extensions beyond the set cycle
time or jitters may occur.
Especially the use of the engineering tools »EASY Starter« , »Engineer« ,
»WebConfig« and an online change or data access may cause such a cycle time
extension and may only be effected in a machine−safe state.
Application as directed
The Controller is an electrical equipment ...
ƒ for installation into control cabinets or similar closed electrical operating areas;
ƒ for implementing control and operating concepts or for presenting information in
usual industrial and commercial fields.
Max. operation surrounding air temperature in vertical mounting position (standard) ...
ƒ without PROFINET (standard): 55 °C
ƒ with PROFINET (option): 50 °C
A different use, or one beyond these purposes, is not permissible!
In order to ensure the protection of persons and material assets, higher−level safety systems
must be used!
