10
Lenz Ges.m.b.H.
Staudachstraße, 3
6858 Schwarzach
Austria
5.2 Turn on the system
5.1
Operation of the machinery
After starting the Flowmould APP, the device will automa-
tically connect with the machinery, if not, please press the
CONNECT button.
In seconds, the app and the machinery will connect, and
the ‘STANDBY’ screen will appear.
With the FLOWMOULD MACHINE in STANDBY mode,
press the STANDBY button to turn on the cooling system
and open the INSOLE SELECTION screen.
The starting time is about 1-1.5 hours, this time allow the
cooling system to reach the target temperature of 5°C.
The system can be used anytime after the temperature di-
splayed is below 15°C.
5 - Use of the machinery
